Printer-friendly version

USER INSTRUCTION No. 621

Ceiling or wall mounting

The reel is intended for wall mounting at delivery.

If the reel should be mounted in the ceiling or on a swing arm - do as follows:

Loosen the bolt on the guide arm and turn it 90° in the recoil direction of the hose.

A peg marks the exact fixation position. Tighten the bolt on the guide arm.


Pivoting bracket

The reel is supplied with a pivoting bracket.
If the pivoting function is not required, remove the nylon gaskets in the hinges.
Thereafter tighten the bolts hard.


Adjustment of spring power

The Hose Reel has a soft recoiling power. It is therefore easy to pull out the hose.

If you wish the hose to be recoiled with more power - do as follows:

Pull out approx. 2 m hose
and let the latch lock
the reel


Pull the hose backwards
through the hose guide
and...


...put the hose on the drum

If even more spring power is required, repeat the procedure once more.
NB! If you tension the spring too many turns the spring may go to the bottom.
The whole hose length can then not be pulled out. There will also be a risk of breaking the spring.
To decrease the spring power - do the reverse according to above.

The hose stop can easily be moved on the hose for desired height of the hose end.


Poor suction

- If the suction becomes poor, objects may have clogged the hose.

- Long objects may clog the hose bend on the side of the reel. Disconnect the hose and remove the objects.

- If objects have clogged the hose somewhere else, dismount the hose from the drum and connect the opposite hose end until the hose gets clean.